SE-60L

Features:

-Standard chassis design, 2U aluminum alloy brushed panel; user-friendly drawing design, beautiful and practical;

-Five-channel audio source signal input (three standard line signals, two standard microphone signals), and an independent knob for each channel to adjust the volume;

-1 channel audio output, can be looped to the next amplifier audio input interface;

-Comes with independent output of six-zone power, CH1-CH6 six-zone constant-voltage output, each zone switch selects output button, and each zone has LED on and off instructions

-With 100V, 70V constant voltage output and 4 ~ 16Ω constant resistance output;

-The volume of each input channel can be adjusted independently, and the treble and bass can be adjusted independently;

-MIC1 automatic mute has an adjustment switch, adjustable range: 0 to -30dB;

-4 unit LED level display, dynamic and clear;

-With perfect output short circuit protection and over temperature protection function;

-Professional noise gate control output signal to ensure the noise suppression of background music;

-Line safe working area protection to ensure that the output load works safely in any harsh environment such as short circuit and overload;

-Peak negative feedback protection, when the signal is distorted, shocked, or the line voltage is severely overvoltage, it is a severe safety test for the terminal speaker and the unit. Peak negative feedback can effectively prevent the signal line and voltage from being loaded in any load No distortion in the environment, but not over pressure;

-Integrated cross tone compensation circuit to correct the high frequency loss caused by the transformer between the lines, so that the signal spectrum curve on the line voltage is straight and the tone is beautiful;

-High-octave bass cut-off circuit to ensure the safe operation of the booster system. The low-cut technology with timbre compensation is adopted to ensure that the ultra-low frequency components that have potential safety hazards to the booster system are removed without losing sound quality;

-Very suitable for broadcasting in medium and small public places.

 

技术参数
设备
型号
SE-60L
SE-120L
SE-180L
SE-240L
SE-300L
SE-360L
SE-500L
SE-650L
额定输出功率
60W
120W
180W
240W
300W
360W
500W
650W
输出
方式
70V、100V、4-16 ohms(Ω)定阻输出
话筒
输入
MIC1/MIC2:600ohms(Ω)10-15mV ,非平衡
线路
输入
AUX1/AUX2/:10kohms(Ω)200-470mV ,非平衡
辅助
输出
0.775V(0dB)
分区
控制
六分区控制输出(100V),六分区开关选择输出按钮
频率
响应
60Hz ~ 16kHz(±3dB)
非线性失真THD
<0.5% at 1kHz,1/3的额定输出功率
信号噪声比S/N
Line:85dB, MIC:>72dB
音调调整范围
BASS:100Hz(±10dB),TREBLE:12kHz(±10dB)
默音抑制能力
MIC1输入时,MIC2、AUX1、AUX2信号衰减0~30 dB
输出调整率
<3dB,从无信号静态工作状态到满负荷工作状态
冷却
方式
由前往后强制风冷、散热器温度45度时启动内置风扇
指示灯
电源:'POWER',电平显示:'2、4、6、8、10'
保护
AC FUSE×5A
AC FUSE×5A
AC FUSE×8A
AC FUSE×8A
AC FUSE×10A
AC FUSE×10A
AC FUSE×12A
AC FUSE×15A
AC FUSE×1,负载短路,温度过高
电源线
(3×1.5 mm2)×1.5M  (标准)
电源
AC 220V ± 10% 50-60Hz
电源
消耗
105W
205W
305W
405W
510W
615W
850W
1105W
机器
尺寸
88(H)×485(W)×340(D)   mm
重重
6.5kg
8.5kg
10.3kg
11.5kg
13kg
14.5kg
16kg
20.8
Copyright © DYSOUND All Rights Reserved.      INXUN.COM.CN